Color Upgrade Kit for The Beast
Change up the color of your The Beast Blower with these easy to change end caps. Mix and Match colors to customize your blower how ever you choose.
2- Intake Grills -metal
2- Intake Grills – plastic
1- Rear Grill
1- 3/16 Hex Key
1- 3/32 Hex Key
Step 1: Remove Air Filter
Step 2: Using the 3/16 hex key provided, remove the 4 screws from the side bumper and set bumper face down.
Step 3: Using the 3/32 hex key provided remove the 4 smaller screws on the inside of the bumper.
Step 4: Remove plastic grill and metal grill and replace with desired color combinations.
Step 5: To Reattach- place desired metal grill into bumper followed by the desired plastic grill.
Step 6: Tighten down the small screws using the 3/32 hex key. Do not over tighten.
Step 7: Making sure the air filter slot is facing towards the top of the blower, slide the bumper back onto the unit and tighten screws using 3/16 hex key. Do not over tighten.
Step 8: Insert Air Filter.
|Dimensions||12.00 × 9.50 × 1.00 in|
BK, BLUE, ORANGE, PURPLE, RED, TEAL